AdventurerKatziA beautiful little heart that is bent out of wire and covered with nail polish. Placed on a stone, this little heart becomes a highlight.
Give it to Mother's Day or birthday together with a beautiful message.
Media Education for Kindergarten and Hort
Relief in everyday life, targeted promotion of individual children, independent learning and - without any pre-knowledge already usable by the youngest!
Put a piece of wire around a round pen, then wrap it around the pen twice.
Turns the wire together several times so that the loops are firmly attached to the pin.
Now carefully push the two loops off the pen.
Then carefully bend the two loops apart.
Now put a little loop in the middle and form a heart from it.
Then you need the nail polish. With the nail polish you show up and take in a lot of nail polish. After that you carefully and slowly strip it over the wire loop.
The nail polish usually does not last immediately. Drive over the loop several times very slowly. Possibly dive into the nail polish again. It can also happen that the varnish drips. You need a little patience, but then a thin paint film lies over the loop.
Stay with the flat brush on the loop and then strip off very slowly.
If the paint film looks very thin, like here in the picture, then take some paint with the brush and strip it off at the wire edge. Thus, the paint layer becomes a little thicker.
Then repeat the process at the second loop.
That's what the finished heart looks like!
Now the heart has to dry.
Then bind the heart with the wire to a stone.
Bend the wire so that the heart stands up.
Rotate the wire on the vertical wire; the wire reaching to the heart.
The heart is standing with the stone.
Make a small card from an old book page and write a message with a felt pen on it. Then punch the paper and attach the card to the wire.
For example:
You can also give the heart in addition to a gift.
Enjoy giftgiving!
Materials
Directions
Put a piece of wire around a round pen, then wrap it around the pen twice.
Turns the wire together several times so that the loops are firmly attached to the pin.
Now carefully push the two loops off the pen.
Then carefully bend the two loops apart.
Now put a little loop in the middle and form a heart from it.
Then you need the nail polish. With the nail polish you show up and take in a lot of nail polish. After that you carefully and slowly strip it over the wire loop.
The nail polish usually does not last immediately. Drive over the loop several times very slowly. Possibly dive into the nail polish again. It can also happen that the varnish drips. You need a little patience, but then a thin paint film lies over the loop.
Stay with the flat brush on the loop and then strip off very slowly.
If the paint film looks very thin, like here in the picture, then take some paint with the brush and strip it off at the wire edge. Thus, the paint layer becomes a little thicker.
Then repeat the process at the second loop.
That's what the finished heart looks like!
Now the heart has to dry.
Then bind the heart with the wire to a stone.
Bend the wire so that the heart stands up.
Rotate the wire on the vertical wire; the wire reaching to the heart.
The heart is standing with the stone.
Make a small card from an old book page and write a message with a felt pen on it. Then punch the paper and attach the card to the wire.
For example:
You can also give the heart in addition to a gift.
Enjoy giftgiving!
Follow us on Facebook , Instagram and Pinterest
Don't miss any more adventures: Our bottle mail
